[SI-LIST] : XTK vs ICX

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Fri Jan 14 2000 - 05:16:15 PST


Dear Gentleman,

My company is in the process of evaluation several Signal Integrity Tools such
as XTK, ICX and Hyperlynx.
We eliminated Hyperlynx already. Our requirements are to design a 19 slot
chassis ( main card, backplane and several plug in cards). We have several high
speed (622Mbs) BLVDS buses, ethernet, gigabit, OC12, OC48, 128 MHz 64 bit DRAM
buses (1Gig), PECL We are focusing on model support, easy of use, rules
checking, what-if, multi-board, tool support.

I would be interested in any feedback as to your experience in using these tools
(Pros and Cons).

Thanks
Tony

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:37 PDT