GO TO HOME PAGE

SOFTWARE FOR MODEM BAYCOM
HARDWARE - SOFTWARE

This is not the "Bible" of Baycom modem, just tests I made and were successful. It's ok for TCM3105 based modem and AM7910 (or similar). All tests are made under Windows 95 (some also under Windows 98)

 

 

  1. TFPCX + TSTHOST + modem Baycom + DOS

  2. HOW TO INSTALL FLEXNET

  3. HOW TO INSTALL AGW PACKET ENGINE;

  4. TPK + modem Baycom;

  5. OTHER SOFTWARE;

  6. TROUBLES.

 

SHORT SOFTWARE DESCRIPTIOPN
AGW PACKET ENGINE This program does all the traffic between the packet applications and your TNCs. It runs as an Icon. It has the capability to handle 100 tncs and 100 applications at the same time. For the moment works with external tncs in KISS mode, Baycom Like serial modems for 1200-9600, DRSI cards (4 sharing the same IRQ line 8 Radioports),Baycom USCC cards, Sound Cards 1200/9600, OE5DXL,YAM, OptoScc, PetScc.
FLEXNET It has the same function of AGWPE; run under DOS and WINDOWS; you can use Sound Blaster Card as packet modem (1200 and 9600 baud).
TSTHOST DOS terminal packet software: up to 8 ports ecc.
TPK DOS terminal packet software.
TSTHWIN windows packet software: up to 8 ports ecc.
WINPACK windows packet software: dx-spot spelling with SB ecc.
RXCLUSTER windows cluster monitor: you can monitor cluster as if you are connected; You can select band-mode-new DXCC spot- IOTA, dx alarm ecc.
AGW UTILITY Various: monitor, terminal, cluster, BBS to use with AGEPE.
WFTHOST windows packet software;
SW2AIZ WINBBS software to manage a BBs under windows
WINHN  

 

 

 

< Back