AGWPE+ RXCLUSTER + BAYCOM MODEM
+ WINDOWS 95

Two words about rxcluster: it's a nice software that allow you monitoring packet cluster and dx-spot without be connected; it's the best software for SWL but also hams can find it useful; ther's a DXCC database that you can update with your own qso-qsl so that you will be informed only about needed country (mode-band setting allowed); there is also a iota database;

• Software needed:
  WINSOCK Ver.2 for Win95 (WS2SETUP.EXE);
  AGWPE (AGWPE.ZIP); (AGW PACKET ENGINE 's Home Page on http://www.raag.org/sv2agw/ );
  DRIVER (DRIVERS.ZIP, SYSTEM.ZIP);
  RXCLUSTER Ver. 7.2a (RXCLUS72.ZIP, UPD72A.ZIP); (RXCLUSTER 's Home Page on http://rchalmas.users.ch/rxclus/;
• Install and run AGWPE as described in page HOW TO INSTALL AGW PACKET ENGINE;
• Install and run RXCLUSTER; in the OPTION window select SERIAL than AGW;
  under LOCAL set your call and UTC time (make it correctly, if not you can have troubles using the "don't see old spot" option!).
  Now you can see the traffic on the monitor window..enjoy!

73 de iz7ath, Talino