From: Guido Hunziker ([email protected])
Date: Thu Mar 30 2000 - 14:08:14 PST
Folks,
can anybody suggest a good supplier of a kit that would allow me to
interface from a coax connector (say, SMA) to a coplanar waveguide (good
up
to 10 GHz).
My CPW guide is on a chip inside a package, and the connector would be
attached to the outside of the housing.
I used a product from Huber&Suhner many years ago, but that doesn't
exist
anymore.
Suggestions?
Thanks
Guido Hunziker
**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:58 PDT