Re: [SI-LIST] : Coax connection to a CPW guide

About this list Date view Thread view Subject view Author view

From: Hans Mellberg ([email protected])
Date: Fri Mar 31 2000 - 07:41:44 PST


If everything else fails, you can contact Barth
Electronics in Boulder City, near Las Vegas. They
construct tapered line adapters similar to what you
need, good to at least 10GHz. The chief engineer there
is Jon Barth, (702) 293-1576.
 

--- Guido Hunziker <[email protected]> wrote:
> Folks,
>
> can anybody suggest a good supplier of a kit that
> would allow me to
> interface from a coax connector (say, SMA) to a
> coplanar waveguide (good
> up
> to 10 GHz).
>
> My CPW guide is on a chip inside a package, and the
> connector would be
> attached to the outside of the housing.
> I used a product from Huber&Suhner many years ago,
> but that doesn't
> exist
> anymore.
>
> Suggestions?
>
> Thanks
>
> Guido Hunziker
>
> **** To unsubscribe from si-list or si-list-digest:
> send e-mail to [email protected]. In the
> BODY of message put: UNSUBSCRIBE si-list or
> UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at
> http://www.qsl.net/wb6tpu
> ****
>
>

=====
Best Regards
Hans Mellberg
EMC Consultant

__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:59 PDT