RE: [SI-LIST] : Bad IBIS models!

From: Muranyi, Arpad ([email protected])
Date: Fri Mar 17 2000 - 10:15:00 PST

• Next message: Larry Smith: "Re: [SI-LIST] : Fast edges with limited plane capacitance"
• Previous message: Muranyi, Arpad: "RE: [SI-LIST] : Bad IBIS models!"
• Maybe in reply to: Kim Helliwell: "[SI-LIST] : Bad IBIS models!"
• Next in thread: Muranyi, Arpad: "RE: [SI-LIST] : Bad IBIS models!"

I also need to comment on this issue, because there are cases when
this can also be correct. Consider the bipolar output transistors,
their IV curve does not go through the origin. And think of the
fancy dynamic clamping or bus hold schemes, you can have all kinds
of interesting IV curves. The bottom line is that one must be
familiar with what is in the buffer before making far reaching
conclusions and labeling the IBIS model maker bad names. You may
turn out to be labeling yourself instead...

Arpad Muranyi
Intel Corporation
===================================================================

-----Original Message-----
From: Kim Helliwell [mailto:[email protected]]
Sent: Wednesday, March 15, 2000 2:29 PM
To: [email protected]
Subject: Re: [SI-LIST] : Bad IBIS models!

Scott McMorrow wrote:
>
> IV curves which don't pass through the origin.
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Larry Smith: "Re: [SI-LIST] : Fast edges with limited plane capacitance"
• Previous message: Muranyi, Arpad: "RE: [SI-LIST] : Bad IBIS models!"
• Maybe in reply to: Kim Helliwell: "[SI-LIST] : Bad IBIS models!"
• Next in thread: Muranyi, Arpad: "RE: [SI-LIST] : Bad IBIS models!"

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:42 PDT