Re: [SI-LIST] : Stack up

About this list Date view Thread view Subject view Author view

From: sweir ([email protected])
Date: Tue Feb 22 2000 - 13:18:39 PST

Lee,

Agreed. But moving the PECL away from a layer adjacent to the LVDS
guarantees the separation. Are you suggesting a better stackup, or more
questions before making a recommendation?

Regards,

Steve.
At 07:46 AM 2/22/00 -0800, you wrote:
>The PECL clocks don't need their own layer. Just make sure that the
>spacing between them and LVDS is large enough that the coupling is within spec.
>
>sweir wrote:
>
> > Iulian,
> >
> > If you need Sig5 for LVDS, get the PECL clocks out of Sig6. Also, do you
> > have a substantial number or single-ended signals? If so, you need to take
> > proper care to avoid crosstalk between those and the LVDS signals as well.
> >
> > Will the PECL clocks fit on signal bottom? If so, then I suggest the
> > following as a symmetric stack-up that will reduce your crosstalk problems
> > between the PECL clocks and LVDS:
> >
> > Signal top
> > 1.8
> > Gnd
> > S1
> > S2
> > Gnd
> > S3
> > S4
> > Gnd
> > S5
> > S6
> > Gnd
> > 3v3
> > Signal Bottom -Pecl clocks
> >
> > Regards,
> >
> > Steve.
> > At 11:23 AM 2/21/00 -0800, you wrote:
> >
> > >Hi
> > >
> > >I'm listening to this list for some time now and I would like to ask your
> > >opinion on a stack-up I'm working on.
> > > It is a board with 4x64 pairs of LVDS signals, 77.76 MHz
> clock, high
> > >speed(777.6 Hb/s).
> > >
> > > I came up with a 14 layers that looks like that:
> > >
> > >Signal top fanout, some analog power
> > >1.8V
> > >Gnd
> > >Sig1 LVDS
> > >Sig2 LVDS
> > >Gnd
> > >Sig3 LVDS
> > >Sig4 LVDS
> > >Gnd
> > >Sig5 LVDS
> > >Sig6 PECL clocks
> > >3.3V
> > >Gnd
> > >Signal bottom fanout
> > >
> > > I'll be using 1.6 mil core for my high speed cap.
> > > I would gladly use less layers, but I'm being forced by the HS3
> > >connectors.
> > >
> > > I would really appreciate your opinion.
> > >
> > >
> > >
> > >Thanks,
> > >
> > >Iulian Ungureanu
> > >PCB Designer
> > >PMC-Sierra,Inc.
> > >[email protected]
> > >http://www.pmc-sierra.com
> > >Voice:(604)415-6053 Ext.2586
> > >Fax:(604)415-6206
> > >
> > >
> > >
> > >**** To unsubscribe from si-list or si-list-digest: send e-mail to
> > >[email protected]. In the BODY of message put: UNSUBSCRIBE
> > >si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> > >si-list archives are accessible at http://www.qsl.net/wb6tpu
> > >****
> >
> > **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> > si-list archives are accessible at http://www.qsl.net/wb6tpu
> > ****
>
>
>
>
>**** To unsubscribe from si-list or si-list-digest: send e-mail to
>[email protected]. In the BODY of message put: UNSUBSCRIBE
>si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
>si-list archives are accessible at http://www.qsl.net/wb6tpu
>****

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:08 PDT