From: [email protected]
Date: Mon Feb 14 2000 - 08:55:37 PST
Take a look at Teradyne's VHDM connector. The 6 row version has 76 signals/inch
with a ground blade between each of the signal rows. There is also an 8 row
version with 101 signals/inch.
"Doug Piper" <[email protected]> on 02/14/2000 09:54:19 AM
Please respond to [email protected]
To: "'reflector, SCSI, post messages'" <[email protected]>, "'Reflector, SFF, post
messages'" <[email protected]>, "'Reflector, SI List, Post Message'"
<[email protected]>
cc: (bcc: Mike R Annand/WLGORE)
Subject: [SI-LIST] : High Density Board to Board Connectors?
I'm looking for a high-density board to board connector. It must have 72
pins and prefer a ground-plane integral to the connector. We're considering;
AMP's Mictor 767007-9 and the SAMTEC 0.8mm QTE-020-03-F-D. Can anyone
recommend any other high-density connectors?
Doug Piper
Woven Electronics
P.O. Box 189
Mauldin, SC 29662
E-mail: [email protected]
Pager: [email protected]
PH 864-967-1751
FAX: 413-812-5761
web: www.wovenelectronics.com
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE si-list or
UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:04 PDT