Re: [SI-LIST] : LVDS signal observation

About this list Date view Thread view Subject view Author view

From: Bruce W. Marler ([email protected])
Date: Wed Feb 02 2000 - 12:25:21 PST


I really like the Tektronix probes. They are so small and convenient. HPs
are the size of soldering irons. I recently purchased the Tektronix P6247
probe - it is a1GHz differential probe - very nice and very high
performance - but fairly expensive.
I also use the P6243 and P6245 probes which are single ended.
Bruce Marler
WooshCom Corporation

----- Original Message -----
From: Christopher wilson <[email protected]>
To: <[email protected]>
Sent: Wednesday, February 02, 2000 11:05 AM
Subject: [SI-LIST] : LVDS signal observation

> I need to buy a new oscilloscope and probes in part to
> observe LVDS signals between devices (as opposed to
> terminating at the scope). A FET probe seems to be
> the least intrusive. Any suggestions for probe type
> or specific scope/amp/probe recommendations? Anyone
> looked at the new Tek CSA8000 for SI applications?
>
> Thanks in advance,
> Chris Wilson, Conexant Systems
>
> **** To unsubscribe from si-list: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
>

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:52 PDT