Australian Bandplans - 2016 70cm Band
=======================================
Band Limits: 430-450 MHz
Primary Service: RADIOLOCATION 420-450MHz
Secondary Service: FIXED, LAND MOBILE 420-450MHz
Secondary Service: AMATEUR 430-450 MHz
AMATEUR SATELLITE 435 - 438 MHz Permitted on non-interference basis
Access: All Licence classes
430.025 - 430.975 REPEATER LINKS - Group A
431.0250 - 431.9375 REPEATER INPUTS Group A (7 MHz offset)
Paired with outputs 438.0250 - 438.9375
431.950 - 432.700 NARROW BAND MODES
431.950 - 432.000 EME guard band
432.000 - 432.100 EME
432.100 - 432.400 CW / SSB
432.100 Calling frequency: national primary
432.200 Calling frequency: national secondary
432.220 - 432.240 Digital DX modes
432.240 - 432.300 Guard band: New Zealand beacons
432.300 SSB chat frequency
432.320 - 432.340 Digital DX modes
432.400 - 432.600 Beacons
432.600 - 433.000 Experimental
432.625 - 432.975 Legacy repeater inputs (5.4 MHz offset)
433.025 - 434.775 ALL MODES
433.050 - 434.790 LIPD Class Licence band
433.025 - 433.750 Legacy repeater inputs (5 MHz offset)
434.000 - 434.775 Repeater links - Group C
434.275 - 434.775 Repeater inputs - 5 MHz offset (legacy)
434.800 - 434.9875 REPEATER INPUTS Group B (5 MHz offset)
(12.5 or 25 kHz channel spacing)
435.000 - 438.000 AMATEUR SATELLITES
438.000 - 438.9375 REPEATER OUTPUTS Group A (7 MHz offset)
(12.5 or 25 kHz channels)
438.0250 - 438.7625 Existing repeater outputs (legacy 5 or 5.4 MHz offset)
438.7750 - 438.9375 New repeater outputs
438.950 - 439.775 FM AND DIGITAL SIMPLEX (12.5 or 25 kHz channel spacing)
438.950 WICEN
439.000 National FM voice calling frequency
439.100 APRS
439.125 Internet gateways
439.150 Internet gateways
439.200 Digital voice calling frequency
439.400 ARDF frequency
439.275 - 439.775 REPEATER OUTPUTS - 5.0 MHz offset (legacy)
439.800 - 439.9875 REPEATER OUTPUTS Group B (5 MHz offset)
440.025 - 440.975 REPEATER LINKS - Group B
441.000 - 442.975 ALL MODES
443.000 - 450.000 ATV
Narrowband & Weak Signal Segment
This segment is reserved for modes such as CW, digital modes and SSB with bandwidths up to 4 kHz. Weak
signal operation has absolute priority. Calling frequencies should be used only to make initial contact and
then vacated as soon as possible. Please avoid any terrestrial operation within the EME segment. The
�Digital DX modes� segments include recommended spot frequencies for SSB-based digital modes.
LIPD Information
Stations operating between 433.050 and 434.790 MHz may experience interference from LIPDs (�Low
Interference Potential Devices�). Repeaters have no protection from interference caused by LIPDs.
|
