From: Hassan Ali ([email protected])
Date: Tue Jul 25 2000 - 07:54:48 PDT
Hi Michael,
I have followed the HSPICE Manual (I use HSPICE 2000.2 for WinNT) and tried
to perform a simulation using an IBIS model of a differential driver but I
wasn't successful. I get the following error message:
** error** iob_eles2:9023:
can not find max value for rising ramp
i,v_ot,v_oto,vrl,vrlo 0 0.0000E+00 0.0000E+00 -8.4400E-01
0.0000E+00
which I cannot understand what causes it. The same IBIS model works fine in
Cadence's SpecctraQuest.
Anybody knows what is the problem here?
Thanks.
Hassan
-----Original Message-----
From: Greim, Michael [mailto:[email protected]]
Sent: Tuesday, July 25, 2000 9:32 AM
To: 'Perry Qu'; [email protected]
Subject: RE: [SI-LIST] : Urgent help needed on HSPICE simulation
Hi Perry,
Hopefully this will lead you in the right direction.
1. Can I do mixed simulation with HSPICE by using both SPICE models and
IBIS
models for my driver/reciever pair ?
Yes, Chapter 20 in the Avanticorp manual (Using Ibis models) should get
you started.
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:51 PST