Main Page About OM7AQ and my club station OM3KKF/OM7F My VHF/UHF activity My EME experiments My MS activity My activity via satelites My activity on HF bands Links for my family pages and other ham pages
 
 

 

 

 
 
 

Ant. Quagi for 144 MHz

by W5UN

 

The W5UN Quagi 97 is a computer optimized quagi derived from the original W5UN Quagi of the early 1980s. The length of the 1997 model has been deliberately shortened to allow it fit on a 24 foot boom. Performance is substantially higher than that of the original antenna. It now compares
favorably with yagis of the same length. The two programs used to optimize the updated antenna were AO6 and NEC 2.

This antenna has not been verified by actual construction. Gain and front to back will be as stated below. The only component of the antenna that needs verification is the 50 ohm match. Who would like to be the FIRST to build the actual prototype model?? Full consultation will be available to
the prototype builder during construction. Contact [email protected] if you wish to be the first!

Large pic. 144 MHz W5UN Quagi

 

Antenna Characteristics:
23' 9"
11 Element Gain: 13.56 dBd at 144.100 Mhz
F/B : 23 dB Stacking: Optimum: E Plane: 13.73'
Optimum: H Plane: 12.86'
Stacking can be reduced up to 90 percent of optimum and still achieve acceptable stacking
gain. Optimum stacking is recommended, however. W5UN QUAGI 97 Dimensions in FREE SPACE:

Element Boom Pos. El. Length Material
Reflector 0.0000" 84.37" loop. #12 solid INSULATED copper wire *
Driven 16.2500" 82.43" loop. #12 solid INSULATED copper wire *
Dir 1 37.1875" 36.168" 3/16" aluminum rod
Dir 2 70.1875" 36.052" 3/16" aluminum rod
Dir 3 102.5000" 35.817" 3/16" aluminum rod
Dir 4 135.8125" 35.475" 3/16" aluminum rod
Dir 5 169.0625" 35.179" 3/16" aluminum rod
Dir 6 202.8125" 35.090" 3/16" aluminum rod
Dir 7 234.2500" 35.324" 3/16" aluminum rod
Dir 8 264.8750" 35.617" 3/16" aluminum rod
Dir 9 285.0000" 35.108" 3/16" aluminum rod

* #12 TW insulated solid copper wire is common house wire, found at most hardware and building supply stores. Do not strip the insulation.

The above dimensions may be used for non metallic booms like wood or fiberglass. If you wish to use a metal boom with through the boom insulated elements, please apply the following correction to the directors only. The reflector and driven quad elem.


(C) 2001 Gyetvai Zoltán OM7AQ