RE: [SI-LIST] : Simulation Models for Cables and Connectors

About this list Date view Thread view Subject view Author view

From: Bhavesh Patel (bpatel@cyras.com)
Date: Thu Jan 11 2001 - 13:57:12 PST


Hi! Its easy to get the connector models in SPICE but then when you are
using it with SI tools they require it to be converted to specific formats
viz in cadence Specctraquest it has to be in DML and there is no easy way to
do this until you can get hold of an expert who can show you the way.
Bob

-----Original Message-----
From: Degerstrom, Michael J. [mailto:degerstrom.michael@mayo.edu]
Sent: Thursday, January 11, 2001 1:18 PM
To: Ron.J.Morneault@fairchildsemi.com; si-list@silab.eng.sun.com
Subject: RE: [SI-LIST] : Simulation Models for Cables and Connectors

Try visiting some of the websites for cable and connector
manufacturers. I think connector models are quite common. It
would be great if cable manufacturers would supply lossy
line (RLCG vs. freq.) or w-element models. If anybody has
seen these then I'd like to here about it. I'd suspect that
most of the models are only available through an NDA.

By the way, is your tool some sort of SPICE preprocessor, or
a stand alone tool? If the latter, then what is wrong with
one of the SPICE offerings that have lossy line models?

Mike

_______________________________________________________________
Mike Degerstrom Email: degerstrom.michael@mayo.edu
Mayo Clinic; 200 1st Street SW ; Rochester, MN 55905
Phone: (507) 538-5462 FAX: (507) 284-9171
WWW: http://www.mayo.edu/sppdg/sppdg_home_page.html
_______________________________________________________________

> -----Original Message-----
> From: Ron.J.Morneault@fairchildsemi.com
> [mailto:Ron.J.Morneault@fairchildsemi.com]
> Sent: Wednesday, January 10, 2001 3:29 PM
> To: si-list@silab.eng.sun.com
> Subject: [SI-LIST] : Simulation Models for Cables and Connectors
>
>
>
> Dear SI Users,
>
> We are in the early stages of developing a cable interconnect(point to
> point ) similation tool.
> Does anyone know if any cable models and/or connector models
> exist and if
> so where do
> I find them? Who would have them and are they readily available?
>
> Any help, comments or feedback is appreciated!
> Thanks in advance!
>
> Ron Morneault
> Applicaitons Engineer
> (207)775-8019
> Fairchild Semiconductor
>
>
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:36 PDT