[SI-LIST] : Simulation Models for Cables and Connectors

From: [email protected]
Date: Wed Jan 10 2001 - 13:29:06 PST

• Next message: Chris Padilla: "Re: [SI-LIST] : Copper balance"
• Previous message: Sean Murray: "[SI-LIST] : fabricating a .5mm 288l test board"
• Next in thread: Degerstrom, Michael J.: "RE: [SI-LIST] : Simulation Models for Cables and Connectors"
• Maybe reply: Degerstrom, Michael J.: "RE: [SI-LIST] : Simulation Models for Cables and Connectors"
• Maybe reply: Bhavesh Patel: "RE: [SI-LIST] : Simulation Models for Cables and Connectors"

Dear SI Users,

We are in the early stages of developing a cable interconnect(point to
point ) similation tool.
Does anyone know if any cable models and/or connector models exist and if
so where do
I find them? Who would have them and are they readily available?

Any help, comments or feedback is appreciated!
Thanks in advance!

Ron Morneault
Applicaitons Engineer
(207)775-8019
Fairchild Semiconductor

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Chris Padilla: "Re: [SI-LIST] : Copper balance"
• Previous message: Sean Murray: "[SI-LIST] : fabricating a .5mm 288l test board"
• Next in thread: Degerstrom, Michael J.: "RE: [SI-LIST] : Simulation Models for Cables and Connectors"
• Maybe reply: Degerstrom, Michael J.: "RE: [SI-LIST] : Simulation Models for Cables and Connectors"
• Maybe reply: Bhavesh Patel: "RE: [SI-LIST] : Simulation Models for Cables and Connectors"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:36 PDT