From: Ingraham, Andrew (Andrew.Ingraham@compaq.com)
Date: Wed Dec 13 2000 - 04:26:21 PST
> Revision 2.2 of the PCI spec. paragraph 184.108.40.206 indicates that the limit
> 2.5 in +/- 0.1 in.
> Is the 0.1in tolerance correct?
Yes, the +/- 0.1 inch is correct, and, in my opinion, quite reasonable.
> Is it necessary to verify the trace length,
> including vias, for each design?
If the spec says the length must be 2.5 in +/- 0.1 in, then yes, you need to
guarantee a length in that range for each design, whether you do it manually
or the tools do it for you. (How many designs do you have?) It should be a
simple thing to check. Most routing tools let you do it quickly.
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:25 PDT