[SI-LIST] : PCB model

About this list Date view Thread view Subject view Author view

From: Dori Itzhaki (dorii@mysticom.com)
Date: Wed Oct 11 2000 - 05:43:40 PDT


I am H.S. boards designer. I need to characterize FR4 PCB behavior of 20"
length with edge-coupled stripline were the trace width is 6 mil and 15 mil
between the edges. Impedance should fit 100 ohm differential. I am
interested in frequency response up to 8ghz.
What kind of problems should I expect ? how can I calculate total PCB loss
for a given frequency?
Could I get a SPICE model for all the spectrum or is it valid only for
specific freq. ?

Thanks in advance
Dori Itzhaki

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:42 PDT