From: Michael Nudelman (email@example.com)
Date: Wed Oct 11 2000 - 08:12:25 PDT
First, do not use FR-4.
Try something else. We do, and it works without equalization. And the backplane
is huge. The traces' runs are up to few feet. Also try to use broadside
coupling; if your skin losses are high, this helps a bit.
Todd Derego wrote:
> I'm working to take a present 1.25Gbps backplane to 2.5Gbps or
> faster. Any thought on transceivers with preemphasis and/or adaptive
> equalization to help get 2.5Gbps or better across a long FR4 backplane? The
> eye looks pretty collapsed at 2.5Gbps but I have seen some products the
> drive across a twisted pair and seem to recover a signal from something that
> does look much like a signal.
> Todd DeRego
> Senior Signal Integrity Engineer
> Lucent Technologies INS
> 200 Nickerson Road
> Marlborough MA 01752
> (508) 786-2168
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
email@example.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:42 PDT