[SI-LIST] : More Help

About this list Date view Thread view Subject view Author view

From: Michael Lamson (m-lamson@ti.com)
Date: Wed Sep 06 2000 - 07:47:16 PDT


Hi folks! Thanks to all those responding to my question on board
geometries. It worked so well I now have another question to present.

I'm looking for 2D and 3D electrical modeling cases that can serve as
standards. That is, they have a closed form solution, or solvable through
conformal mapping, or have been solved by so many experts that the solution
can serve as a standard. The cases I am aware of are for two round wires, a
round wire above a plane, and round coaxial conductors for 2D. I'm not
aware of anything for 3D (looking for plane and trace inductance with two
ports or more).

Again, any help is appreciated.

Best regards,

Mike Lamson
m-lamson@ti.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:27 PDT