From: Dan Swanson (DSWANSON@BartleyRF.com)
Date: Thu Sep 07 2000 - 04:14:20 PDT
There is also an exact analytical solution for homogeneous
stripline. I usually use air.
You can use the coax or stripline standards for 2D or 3D.
In 3D, plot error in impedance and error in phase length.
Sonnet Software also has an app note on test cases
suitable for Moment Method codes(and others).
Dan Swanson EMAIL: firstname.lastname@example.org
Bartley RF Systems, Inc. TEL: 978-388-7600 Ext. 307
37 South Hunt Road FAX: 978-388-7077
Amesbury, MA 01913
> -----Original Message-----
> From: Michael Lamson [SMTP:email@example.com]
> Sent: Wednesday, September 06, 2000 10:47 AM
> To: firstname.lastname@example.org
> Subject: [SI-LIST] : More Help
> Hi folks! Thanks to all those responding to my question on board
> geometries. It worked so well I now have another question to present.
> I'm looking for 2D and 3D electrical modeling cases that can serve as
> standards. That is, they have a closed form solution, or solvable through
> conformal mapping, or have been solved by so many experts that the
> can serve as a standard. The cases I am aware of are for two round wires,
> round wire above a plane, and round coaxial conductors for 2D. I'm not
> aware of anything for 3D (looking for plane and trace inductance with two
> ports or more).
> Again, any help is appreciated.
> Best regards,
> Mike Lamson
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> email@example.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:27 PDT