Re: [SI-LIST] : Split Plane

About this list Date view Thread view Subject view Author view

From: Doug McKean ([email protected])
Date: Tue May 23 2000 - 11:34:02 PDT


Short question ...

What's the fastest edge rate?

- Doug

Brad Crowell wrote:
>
> Michael and others who have replied,
>
> Yes, we have included alot of ground on this board. The concern for EMC/EMI
> issues is quite high for our client, this is for a medical application. We
> pulled out all the stops to ensure every signal layer is referenced to a
> ground plane, rather than a power plane, which I understand should give
> better EMC performance. We are also trying to avoid routing on the outer
> layers as much as possible. The stackup you attached to your reply would not
> provide as much interplane capacitive coupling, which concerns me. Clock
> rates on my board are about 100MHz max, not extremely fast but includes some
> devices with pretty quick edges.
>
> Thanks for all the comments,
> Brad

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:27 PST