[SI-LIST] : XFX error

About this list Date view Thread view Subject view Author view

From: Philip Gantt (pgantt@cisco.com)
Date: Wed May 10 2000 - 15:03:37 PDT


Here's a good one for all of the XTK experts out there. In running XFX,
I experienced the following error:

ERROR 330: Jacobi convergence error.

ERROR 73: Solution fails to converge for configuration CFG_186, try with finer
grid.

ERROR 71: Failure to process loss matrix

FATAL_ERROR 4: Error in Processing input file

Illegal Instruction

I have already done the obvious like examining the stackup in the gcf file and
structure of the xfx file. Nothing unusual stands out. I looked at CFG_186 and
it doesn't look much different than CFG_185. How do I get this to converge with
a finer grid?

--
Philip R. Gantt   pgantt@cisco.com                .           .
Phone : (408) 527-2918                            |           |
Fax   : (408) 526-5504                           |||         |||
Pager : (408) 814-8868                          |||||       |||||
170 West Tasman Drive, SJ-G2                  |||||||||   |||||||||
San Jose, CA 95134-1706 (U.S.A.)          .:|||||||||||||||||||||||||:.

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:16 PST