[SI-LIST] : HSPICE Control card for simulations with inductors

About this list Date view Thread view Subject view Author view

From: Yehuda D. Yizraeli (yehuda@zoran.co.il)
Date: Sun Apr 02 2000 - 22:21:12 PDT


Hi,

        We perform many IO simulations with inductors and board models. We manage
to finish the simulations at slow corner, however hardly 10% of the
simulations are starting with initial condition at typical/fast. Most of the
time the fast simulations will fail due to fast voltage change due to the
inductor (time step too small). I added small resistors to the inductors,
however would like to understand how these simulations can be COMPLETED.
These are key simulations for noise and cross-talk.

                                thanks in advance for the help, yehuda

-------------------------------------------------------------------
   Yehuda D. Yizraeli

   Zoran Microelectronics Ltd. E-mail : yehuda@zoran.co.il
   Advanced Technology Center Direct Tel: 972-4-85-45-795
   P.O.B. 2495, Haifa 31204, Operator : 972-4-85-45-777
   ISRAEL Cellular : 972-52-556-335
   http://www.zoran.com Fax : 972-4-8-551-550
-------------------------------------------------------------------

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

              Problems are only opportunities in work clothes.
              -- Henry J. Kaiser

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:36:00 PDT