RE: [SI-LIST] : CAD for SI, EMC. Hyperlynx experiences.

About this list Date view Thread view Subject view Author view

From: Mayer, Mike (mikem@cp.artesyn.com)
Date: Thu Feb 17 2000 - 13:35:27 PST


> My main objective is to reduce the number of PCB iterations
> and off-site testing, by predicting the EM radiation from a
> PC board, and be able to compare different ground plane and
> signal routing strategies.

I have no direct experience with EMC tools, but as far as I know they are
not very good at predicting emissions caused by common mode currents.

I do have direct experience with EMC testing, and most emissions problems I
have had are with common mode currents on cables.

============================================================================
=
Mike Mayer Artesyn Communication Products, Inc
Senior Hardware Design Engineer Madison, WI
Mike.Mayer@cp.artesyn.com http://www.artesyn.com/cp
============================================================================
=
 

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:05 PDT