From: Mellitz, Richard ([email protected])
Date: Thu Feb 17 2000 - 12:26:17 PST
What they don't tell you is you may want to set the following for high speed
buses:
.OPTION VFLOOR=1p
Unity volt-time ramps have a tendency to be real small amplitudes and Vfloor
tells HSPICE to record those small voltage numbers.
... Rich
-----Original Message-----
From: Scott McMorrow [mailto:[email protected]]
Sent: Thursday, February 17, 2000 2:54 PM
To: [email protected]; Greim, Michael
Subject: Re: [SI-LIST] : Creating and displaying eye diagrams with
Avanti HSpice.....
Look in your demo directory for AWAVES.
There is an example in there.
AVANTI\99.2\DEMO\AWAVES\DEMO\EYEDIAG.SP
on my system.
scott
"Greim, Michael" wrote:
> Does anyone out there have a good reference, tutorial
> or example of creating eye diagrams with Avanti Hspice.
> Thanks for the help.
>
> MG
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE si-list
or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
-- Scott McMorrow Principal Engineer SiQual, Signal Quality Engineering 18735 SW Boones Ferry Road Tualatin, OR 97062-3090 (503) 885-1231 http://www.siqual.com**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:05 PDT