RE: [SI-LIST] : Backplane connectors for Fibre Channel

Farrokh Mottahedin (Farrokh.Mottahedin@quantum.com)
Tue, 24 Nov 1998 17:23:16 -0800

Check out the backplane profile in the 1394 High Speed Serial Bus
specification for speeds up to 400 Mbps. For gigabit applications of 1394,
a connector was specifically designed and tested for the so called Device
Bay initiative. Both of these connectors should meet your requirements for
LVD signaling and hot plugging. Contact AMP, Molex or FoxConn (408)
749-1228 and ask for specs and samples.

Regards,

Farrokh Mottahedin
Quantum Corporation
(408) 324-7934
farrokh.mottahedin@quantum.com

> -----Original Message-----
> From: Grasso, Charles (Chaz) [SMTP:GrassC@LOUISVILLE.STORTEK.COM]
> Sent: Tuesday, November 24, 1998 1:25 PM
> To: 'Signal Integrity'
> Subject: [SI-LIST] : Backplane connectors for Fibre Channel
>
> Hello.
>
> Can anyone out there recommend a connector for backplanes
> using Fibre Channel HF lines
> Thank you
> Charles Grasso
> StorageTek
> 2270 Sth 88th Street
> Louisville CO 80027 MS 4262
> grassc@louisville.stortek.com
> Tel:(303)673-2908
> Fax(303)661-7115
>
>
> **** To unsubscribe from si-list: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list, for more help, put HELP. si-list archives are accessible at
> http://www.qsl.net/wb6tpu/si-list ****

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****