[SI-LIST] : specctraquest waveform sims fail with design link and buffer dela ys on the fly......

About this list Date view Thread view Subject view Author view

From: Greim, Michael (mgreim@sonusnet.com)
Date: Wed May 09 2001 - 12:32:15 PDT


Hi All,
 
I am seeing something odd in specctraquest 13.6 and wanted to
solicit your opinion to see if this is a feature of the tool or
perhaps something else is going on. Simply put, any time
that I try a waveform simulation that includes a design link
and calculates buffer delays on the fly, the simulation fails
at all three speeds. If I run the sim using delays from the library,
the simulation passes and when I calculate buffer delays in
the model editor that passes as well. In both cases I am in
clined to believe the results.
 
Any thoughts?
 

Best Regards,

Michael C. Greim Sonus Networks
mgreim@sonusnet.com 978-589-8336

Making the world safe for digital signals everywhere

And all this science I don't understand
It's just my job six days a week

The time is gone. The email's over
Thought I'd something more to say......

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:52 PDT