RE: [SI-LIST] : Upper limit of interplane capacitance

About this list Date view Thread view Subject view Author view

From: Barry Ma ([email protected])
Date: Fri Jun 09 2000 - 16:33:23 PDT

Larry,

Thanks for your instructive input.

Our simple task is to know what is the upper limit of operating frequency for the planecap. In S11 measurement, when the measuring point in the Smith chart moves from outside circle (nearly "short circuit") toward the center, indicating the impedance of planecap gets higher than 1 ohm, we can know that is the upper limit.

The price for the simple S11 measurement is inaccuracy. But it still gives us a rough approximation.

Regards,
Barry Ma

_______________________________________________________________________

Why pay when you don't have to? Get AltaVista Free Internet Access now!
http://jump.altavista.com/freeaccess4.go

_______________________________________________________________________

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:34 PST