Welcome to the contributions page. This is where you
will find examples of progress, builds, etc related to the 3D printer project. Not all are 'in-house' such as those that
may also be found on the BSARC Facebook page, as well as others.
*Big Spring Amateur Radio Club ANET A8 Step 1 Assembly with 3D printer introduction.
Click here to watch in a new tab/window if you don't want to watch the tinsy-tiny one...
Contributor: Kourtney Colby Taylor:
Now get my story right so I don't go on a rabbit hunt... From my understanding our fellow HAM Lloy Duck had something to do with you getting one of these right sir?
Lol.. well, Lloyd talked me into getting one. He sent me the link and i couldn�t turn it down for the price. I had always wanted one so I figured I get it.
So here's a look at some of the things he has going on so far: Click on any image to enlarge.
Pictured top left to right down and left to right again:
1] Support links have been printed = 'the snake' looking sections to support the cabeling / 2] A close up of the controller board with a printed
enclosure - Kourtney said it took several hours to print that part / 3] an underneath view of the H bracket supporting the heated plate and
belt drive / 4] Some 3D drafting with a call sign / 5] A custom printed bracket to hold a couple radios
