Here is a photo of our tower.
33' of Rohn 25, free standing, with a Glenn-Martin Hazer, Yaesu G-800SA Rotor, and a Cushcraft MA5B HF Antenna. The Hazer makes it real convenient to work on the antenna. We have since put up a 40M Inverted V hanging off the side of the hazer as well.

Pumping 2.4 cu-yards of concrete into the 4x4x4 ft. hole with re-bar and tower section. Overkill for the height of tower, but this is Florida!

It took me a day to dig the hole and get ready fir the concrete. It took them about 30 minutes to pump and smooth! The only way to go!

KE4IZT - Thanks John

Cushcraft MA5B & Glenn-Martin H4 Hazer

We had the Hazer from our previous QTH in Naples. It has a thrust bearing at the top that will handle 800 lbs.! We chose the MA5B to keep the size down for our neighbors! So far the beam has performed very well for its size.

J.H.Bunnell Co. - "Gold Bug" # 770
Circa. 1927 - Fun Restoration Project
Sold to a collector.

K1PJ-Pete & W8FCW-Richard
HCARC - 2007 FD - CW Station
Murphy's Law at work!

HOME | INFO | PHOTOS

   Updated: 12/2/2007          Pete Jordan - K1PJ          Email: [email protected]