From: Ozgur Misman (omism@amkor.com)
Date: Thu Feb 15 2001 - 11:07:41 PST
Hi Muhammad,
I think there should be information in the archivessince this topic was
discussed frequently as far as I remember. You can also check out
http://www.ultracad.com/pcbtemp.pdf
Ozgur Misman
Muhammad Sagarwala <msadiq@force10networks.com> on 02/15/2001 11:24:41 AM
Please respond to Muhammad Sagarwala <msadiq@force10networks.com>
To: si-list@silab.eng.sun.com
cc:
Subject: [SI-LIST] : current carrying capability of circuit
board traces
Hello All,
I am looking for some information on current carrying capability of circuit
board traces e.g.
how much current could you pump through a trace before it blows, etc. Does
any know of a good
reference, webside,etc.
Muhammad
**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:51 PDT