Re: [SI-LIST] : why was 50ohm impedance chosen by engneers?

From: Shameem Ahmed ([email protected])
Date: Tue Jan 16 2001 - 16:53:15 PST

• Next message: Andrew W. Riley III: "Re: [SI-LIST] : why was 50ohm impedance chosen by engneers?"
• Previous message: Yu Wang: "[SI-LIST] : why was 50ohm impedance chosen by engneers?"
• In reply to: Yu Wang: "[SI-LIST] : why was 50ohm impedance chosen by engneers?"
• Next in thread: Andrew W. Riley III: "Re: [SI-LIST] : why was 50ohm impedance chosen by engneers?"

hi Yu:
check at
http://www.sigcon.com/articles/edn/why50.htm

shameem

Yu Wang wrote:

> Hi, all there,
> sorry for coming up with this old question again.
> because I can't find those mails which contain the
> hotlink to the explanation? thanks alot.
>
> regards,
> Yu
>
> =====
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Andrew W. Riley III: "Re: [SI-LIST] : why was 50ohm impedance chosen by engneers?"
• Previous message: Yu Wang: "[SI-LIST] : why was 50ohm impedance chosen by engneers?"
• In reply to: Yu Wang: "[SI-LIST] : why was 50ohm impedance chosen by engneers?"
• Next in thread: Andrew W. Riley III: "Re: [SI-LIST] : why was 50ohm impedance chosen by engneers?"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:38 PDT