From: Degerstrom, Michael J. ([email protected])
Date: Thu Dec 21 2000 - 06:53:34 PST
When you asked how are they made, are you asking how are
they simulated or how they are measured?
WRT how they are interpreted, I think that the various
artifacts within the eye can each be caused by many
artifacts. Interpreting the artifacts takes experience
with knowledge of the circuit and if its a measured
eye diagram you also have to know your test equipment well.
Mike Degerstrom Email: [email protected]
200 1st Street SW
Gugg. Bldg. RM 1042A Phone: (507) 284-3292
Rochester, MN 55905 FAX: (507) 284-9171
> -----Original Message-----
> From: Wilco Hamhuis [mailto:[email protected]]
> Sent: Monday, December 11, 2000 8:02 AM
> To: SI List
> Subject: [SI-LIST] : request info eye patterns
> does anybody know a good, non-commercially Internet site regarding eye
> patterns? How they are made, how to interpret them etc.?
> Wilco Hamhuis
> High Speed System Designer
> Transfer, the Netherlands
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected] In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:30 PDT