Re: [SI-LIST] : 200 ohms

About this list Date view Thread view Subject view Author view

From: GARY ROSEN (gmr@appsig.com)
Date: Fri Dec 01 2000 - 12:04:26 PST


Is that .250" (250 mils), .25 mils, or .25 mm? Makes quite a difference,
reminding me of "This Is Spinal Tap" (Stonehenge, for those who know :^)).

- Gary Rosen

Sean Murray wrote:

> Anyone able to achieve 200 ohms on .250 thick board before? If not what is
> the closest achievable board impedance within reason?
>
> Sean Murray
> General Manager
>
> M&M Specialties, Inc.
> 1236 W. Southern Ave. #106
> Tempe, AZ 85282
> 1-800-892-8760 x105
>
> www.mmspec.com
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****



**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:20 PDT