From: Ray Anderson (Raymond.Anderson@eng.sun.com)
Date: Fri Dec 01 2000 - 10:22:17 PST
Not sure what you are trying to do, but if you go microstrip,
a 4 mil wide trace on a 250 mil thick FR4 substrate will give
you about 200 ohms impedance. (according to apsim RLGC)
> Anyone able to achieve 200 ohms on .250 thick board before? If not what is
> the closest achievable board impedance within reason?
> Sean Murray
> General Manager
> M&M Specialties, Inc.
> 1236 W. Southern Ave. #106
> Tempe, AZ 85282
> 1-800-892-8760 x105
**** To unsubscribe from si-list or si-list-digest: send e-mail to
email@example.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:20 PDT