Re: [SI-LIST] : Ferrite Beads

About this list Date view Thread view Subject view Author view

From: RMELLISON@aol.com
Date: Fri Nov 17 2000 - 20:00:25 PST


Dilpreet,
I've used ferrites in both the power and ground connections when I wanted
total isolation from the main part of a card, such as a small analog area in
a big ttl card. To do this, it is necessary that the signals into and out
of the isolated area are done differentially. Single ended signals will
cause ground lift effects. It's also necessary that no other signal traces
are referenced through this isolated region.
Richard Ellison

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:10 PDT