From: Dilpreet Saini (DSAINI@altera.com)
Date: Wed Nov 15 2000 - 13:44:38 PST
In the past I have used ferrite beads for transient and parasitic suppression of the supply (VCC) coming into the board. So far I have never used ferrite beads in series with the GND trace/plane. I was wondering do any of you have any experience using ferrite beads in that scenario.
Thanks in advance for your help.
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:08 PDT