[SI-LIST] : trace to trace coupling

About this list Date view Thread view Subject view Author view

From: Sean Murray (seandm@mmspec.com)
Date: Fri Sep 15 2000 - 12:09:34 PDT


Does anyone know the formula in order to calculate the coupling percentage
between two signals seperated by a solid ground plane? At what
frequency/edge rate does one have to start thinking about staggering their
traces so that they do not get coupling between two stripline layers..

 Regards,
Sean Murray
General Manager
 
M&M Specialties Inc.
1236 W. Southern Ave. #106
Tempe, AZ. 85282-4518
Phone: (480) 858-0393 x105
Cell: (602) 684-7859
Fax: (480) 858-1882
Email: seandm@mmspec.com
WWW.mmspec.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:29 PDT