[SI-LIST] : Board Data Needed

About this list Date view Thread view Subject view Author view

From: Michael Lamson (m-lamson@ti.com)
Date: Thu Aug 24 2000 - 07:43:16 PDT


Hi folks. I would like to get some typical numbers for PC board RLCG
parameters. I am coming from the packaging side and I'm not familiar with
the latest board technologies. I can generate these numbers myself if you
have typical line width/spacing/thickness geometries, dielectric properties
(epsilon and loss tan) and dimensions. Any info will be appreciated.

Best regards,

Mike Lamson
TI
m-lamson@ti.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:19 PDT