From: Tom Devlin ([email protected])
Date: Tue Aug 22 2000 - 07:56:34 PDT
The ATN Microwave solution can accurately measure the
differential impedance through our time domain option.
Check us out at:
ATN Microwave, Inc.
Signal Integrity Measurement Solutions
978-667-4200, ext 8030
Sean Murray wrote:
> We are seeing quite a bit of requests for high speed differential
> pair boards; edge-2-edge, broadside, you name it. Recently I received one
> where the two complements were none of the above, but rather were joined at
> a central point. They are not close enough to be edge to edge, nor do they
> even run in the same general vicinity; rather they run to a central point.
> Any idea what this is and how to measure, specify to make sure that
> the diff impedance is what is required (zod=100 ohms, z=50).
> Sean Murray
> General Manager
> M&M Specialties Inc.
> 1236 W. Southern Ave. #106
> Tempe, AZ. 85282-4518
> Phone: (480) 858-0393 x105
> Cell: (602) 684-7859
> Fax: (480) 858-1882
> Email: [email protected]
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected] In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:19 PDT