[SI-LIST] : Bus Design Methodology in SpectraQuest

About this list Date view Thread view Subject view Author view

From: Vinh Do (vdo@juniper.net)
Date: Mon Jul 31 2000 - 18:11:15 PDT


Hi all,

I am trying to figure out how to design the complex buses in SpectraQuest.
From what I know, there is an option "Custom" in the "IO Cell Stimulus Edit"
in this tool that allow us to set up for synchronous and source synchronous
timing simulation, but I do not fully understand them. I am wondering if
there are anyone who has experience with these that can help me with or give
me the source of information. I would appreciate any help.

Regards.

Vinh Do
Phone : 408 - 745 - 8103
Email : vdo@juniper.net

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:54 PST