[SI-LIST] : IBIS Model question, VT curves

From: Mark Nass ([email protected])
Date: Thu Jul 06 2000 - 09:25:33 PDT

• Next message: Ingraham, Andrew: "RE: [SI-LIST] : IBIS Model question, VT curves"
• Previous message: Larry Miller: "RE: [SI-LIST] : Ethernet RJ-45 connectors"
• Next in thread: Ingraham, Andrew: "RE: [SI-LIST] : IBIS Model question, VT curves"
• Maybe reply: Ingraham, Andrew: "RE: [SI-LIST] : IBIS Model question, VT curves"

Hello IBIS model experts,

  What is the best load for the VT waveform section of an IBIS model for a
differential
type buffer? Or doesn't make a difference.

- The standard rising and falling into a resistor pulled up to VDD and
rising and falling
  into a resistor pulled to GND?
- Rising and falling into a resistor to 1/2 of VDD?

Thanks,
Mark Nass

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Ingraham, Andrew: "RE: [SI-LIST] : IBIS Model question, VT curves"
• Previous message: Larry Miller: "RE: [SI-LIST] : Ethernet RJ-45 connectors"
• Next in thread: Ingraham, Andrew: "RE: [SI-LIST] : IBIS Model question, VT curves"
• Maybe reply: Ingraham, Andrew: "RE: [SI-LIST] : IBIS Model question, VT curves"

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:45 PST