RE: [SI-LIST] : Looking for "Lossy Coating Material"

About this list Date view Thread view Subject view Author view

From: Doug Piper (doug.piper@wovenelectronics.com)
Date: Wed May 17 2000 - 19:55:53 PDT


Patrick,
I believe that's what I saw. Thanks for replying!

Doug Piper, Woven Electronics, P.O. Box 189, Mauldin, SC 29662
PH 864-967-1751, FAX 864-963-1761, e-mail: doug.piper@wovenelectronics.com
www.wovenelectronics.com

-----Original Message-----
From: Zabinski, Patrick J. [SMTP:zabinski.patrick@mayo.edu]
Sent: Wednesday, May 17, 2000 2:07 PM
To: si-list@silab.eng.sun.com
Subject: RE: [SI-LIST] : Looking for "Lossy Coating Material"

If you're referring to my posting, I suggested products
made by Emerson & Cuming which most people know
as Eccosorb/Echosorb (SP?). They make several varieties,
including sheet, paint, and spray forms.

Pat

> A week or so ago, someone posted a suggestion for a source of
> PCB coating material
> cause high frequency 'roll-off' when applied to PCB's.
>
> Would you mind recommending vendors for this material again?
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:23 PST