[SI-LIST] : RF boards

About this list Date view Thread view Subject view Author view

From: Sean Murray (seandm@mmspec.com)
Date: Fri Apr 28 2000 - 07:58:29 PDT


Anyone have any feelings on what subtle differences when fabricating a
board can do to an RF board. Such as going from FR-4 to Getek; 50/200
gold/nickle vs. 30/100 gold/nickle. Is there any books out there that
deal with strictly the layout of RF boards??

Regards,
Sean Murray
Sales Manager
 
M&M Specialties Inc.
1236 W. Southern Ave. #106
Tempe, AZ. 85282-4518
Phone: (480) 858-0393 x105
Cell: (602) 684-7859
Fax: (480) 858-1882
Email: seandm@mmspec.com
WWW.mmspec.com
                  
                  

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:08 PST