Re: [SI-LIST] : (urgent) SI tool demand

About this list Date view Thread view Subject view Author view

From: Scott McMorrow ([email protected])
Date: Tue Feb 29 2000 - 00:34:09 PST


Devrim,

Unicad was acquired by Cadence
You might talk with them.

regards,

scott

--
Scott McMorrow
Principal Engineer
SiQual, Signal Quality Engineering
18735 SW Boones Ferry Road
Tualatin, OR  97062-3090
(503) 885-1231
http://www.siqual.com

Devrim Fidanci wrote:

> Dear Sirs, > I am currently looking for a (postlayout) SI tool with EMC and Crosstalk analyzer... > I had a demo of Hyperlynx's, but that tool has no PCB interface tool for Unicad.. > PCB desingner in my company are using Unicad as a PCB desind software... > > Will you please suggest me any post-layout SI tool that can imports Unicad files..? > > thanks, > Devrim > [email protected] > > **** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. > si-list archives are accessible at http://www.qsl.net/wb6tpu > ****

**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:35:14 PDT