[SI-LIST] : High-Speed Materials {[DC] & SI-List}

About this list Date view Thread view Subject view Author view

From: Alderete, Michael (MICHAEL.ALDERETE@Aerojet.com)
Date: Thu Feb 03 2000 - 09:49:24 PST


Hello all-

I'm posting this question on behalf of Alexis, from IPC's forum [sorry for
cross-post].

Thx to all who can help on this one.

Michael Alderete
Aerojet, Azusa CA

-----Original Message-----
Sent: Thursday, February 03, 2000 9:21 AM
To: DesignerCouncil@IPC.ORGSubject: [DC] High-Speed Materials

We are currently researching materials that will handle high-speed circuits
(over 1 ghz) better than the current FR4 that we've been using. We've talked
to our fab vendors and they are recommending alternatives such as Getek,
Tetra 2, and Rogers 4350. Now I'd like to hear from the end users. Has
anyone out there gone through a similar transition? What were your
experiences with the more costly materials? Any input would be greatly
appreciated.

********************
Alexis Meehan
PCB CAD Mgr.
408-328-4595
alexism@luxn.com
LuxN, Inc.
570 Maude Court
Sunnyvale, CA 94086

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Apr 20 2000 - 11:34:54 PDT