You might check the R&D catalogue, page 358. Alpha lists an RG178B/U 50 ohm cable that is 0.071 outside diameter.
John Fisher wrote:
> Everyone,
>
> I am looking for some tiny 50 Ohm co-ax suitable for re-work on prototype boards. Would like a very thin OD in the range of .075" - .1" or LESS.
>
> Best we have so far is an Alpha 917B or Pasternack RG-178. There has got to be something thinner out there that is not rigid or semi-rigid.
>
> Any good p/n's with mfgr name and a source also??
>
> Thanks in advance !
>
> John
>
> *********************************************************************
> John M. Fisher -- Cisco Systems -- [email protected]
> 170 W. Tasman Dr., Bldg G, San Jose CA 95134-1706
> __ _ _
> ________/// \_/ \________/ \ ____
> \/
> Signal Integrity Engineer, Enterprise Line of Business
> 408-527-9186, Page 408-308-5501, Fax 408-526-5504, N6PFN
> *********************************************************************
>
> **** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
-- Philip R. Gantt [email protected] . . Phone : (408) 527-2918 | | Fax : (408) 526-5504 ||| ||| Pager : (408) 814-8868 ||||| ||||| 170 West Tasman Drive, SJ-G2 ||||||||| ||||||||| San Jose, CA 95134-1706 (U.S.A.) .:|||||||||||||||||||||||||:.
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****