[SI-LIST] : mini co-ax

John Fisher (jmfisher@cisco.com)
Wed, 14 Apr 1999 11:06:04 -0700

Everyone,

I am looking for some tiny 50 Ohm co-ax suitable for re-work on prototype boards. Would like a very thin OD in the range of .075" - .1" or LESS.

Best we have so far is an Alpha 917B or Pasternack RG-178. There has got to be something thinner out there that is not rigid or semi-rigid.

Any good p/n's with mfgr name and a source also??

Thanks in advance !

John

*********************************************************************
John M. Fisher -- Cisco Systems -- jmfisher@cisco.com
170 W. Tasman Dr., Bldg G, San Jose CA 95134-1706
__ _ _
________/// \_/ \________/ \ ____
\/
Signal Integrity Engineer, Enterprise Line of Business
408-527-9186, Page 408-308-5501, Fax 408-526-5504, N6PFN
*********************************************************************

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****