[SI-LIST] : Geometry-Transfer from I-DEAS to EMAS

Schulte, Michael (Michael.Schulte@HARTING.com)
Thu, 18 Mar 1999 13:33:02 +0100

Has anyone some experience with the Geometry-Transfer from I-DEAS to EMAS.
We have tried the IGES-translator and also a STEP-Interface.
Both methods didn't work well.
The IGES translator only works well with 2D data. The import of 3D-Geometry
into EMAS didn't work.
A failure occur or the imported geometry can't be split into regions with
The same problems with imported 3D geomerty occurs with a STEP-Interface
(AP203 and AP214).
Has anybody solved these geometry transfer problem or can give some helpful
suggestions to solve it.

Thanks in advance,

Michael Schulte
Marienwerderstr. 3
32339 Espelkamp; Germany

Ph.: ++49 5772 / 47-613
Fax.: ++49 5772 / 47-403
e-mail.: Michael.Schulte@HARTING.com
WWW: http://www.emc-online.com/harting
WWW: http://www.harting.com

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****