RE: [SI-LIST] : Clock Jitter

About this list Date view Thread view Subject view Author view

From: Todd Westerhoff (twester@hhnetwk.com)
Date: Tue Apr 24 2001 - 14:17:16 PDT


Clock jitter normally does not apply to hold equations because both the
driver and receiver are referencing the same clock edge.

Todd.

-----Original Message-----
From: owner-si-list@silab.eng.sun.com
[mailto:owner-si-list@silab.eng.sun.com]On Behalf Of dkhatri
Sent: Tuesday, April 24, 2001 3:45 PM
To: si-list@silab.eng.sun.com
Subject: [SI-LIST] : Clock Jitter
Importance: Low

Hi all,
I have a question regarding the Clock jitter term. whether we should be
using CLOCK JITTER term in the Hold Equations or not.Can any body please
explain me whether we should or should not use it and why?

Thanks,
Dirgha Khatri
Simulation Engineer
Micron Technology

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:43 PDT