Process / Temperature Controllers

SLAVE Temperature Controller STC-52
  • It is a temperature controller with 3-states feedback structures for use with industrial furnaces. The set point is set on the potenciometer or by means of interface SPI. The parameter and configuration data are stored in the EEPROM.
  • 2 Inputs: Optocoupler (AUTO, ALARM),
  • 2 Outputs: Relay (Star/Delta heater),
  • Analog input :
    • Sensor Tip K = NiCr-Ni (0...1300°C),
    • 0-5V (4-20mA)
  • Control range: 0...2000°C,
  • Resolution: 12 bit (1:4096),
  • Measurement accuracy with linearized transducers: < 0,1%,
  • Indication: 4-digit 7-segment LED display,
  • Interface: SPI, optically-isolated (Option: RS-485),
  • Supply voltage: 220V ac,
  • Dimensions: 96x96x100mm.

 
SLAVE Temperature Controller STC-54
  • It is a temperature controller with 3-states feedback structures for use with industrial furnaces. The set point is set on the keys or by means of interface SPI. The parameter and configuration data are stored in the EEPROM.
  • 2 Inputs: Optocoupler (AUTO, ALARM),
  • 2 Outputs: Relay (Star/Delta heater),
  • Analog input :
    • Sensor Tip K = NiCr-Ni (0...1000°C),
    • Sensor Tip J = Fe-CuNi (0...600°C),
    • 0-5V (4-20mA)
  • Control range: 0...1000°C,
  • Resolution: 10 bit (1:1024),
  • Measurement accuracy with linearized transducers: < 0,5%,
  • Indication: 4-digit 7-segment LED display,
  • Interface: SPI, optically-isolated (Option: RS-485),
  • Supply voltage: 220V ac,
  • Dimensions: 96x96x100mm.
SLAVE PID Temperature Controller MCS-31
  • It is a temperature controller with 3-states feedback structures for use with industrial furnaces. The set point is set on the potentiometer or by means of interface SPI. The parameter and configuration data are stored in the EEPROM.
  • 2 Inputs: Optocoupler (AUTO, ALARM),
  • 2 Outputs: Relay (Star/Delta heater),
  • Analog input :
    • Potenciometer
    • 0-5V (4-20mA)
  • Control range: 0...2000°C,
  • Resolution: 12 bit (1:4096),
  • Measurement accuracy with linearized transducers: < 0,1%,
  • Indication: 4-digit 7-segment LED display,
  • Interface: SPI, optically-isolated (Option: RS-485),
  • Supply voltage: 220V ac,
  • Dimensions: 96x96x100mm.
Download User Manual:
  • MCS-31.pdf

    		•






    SLAVE PID Temperature Controller MCS-42
    • It is a temperature controller with 3-states feedback structures for use with industrial furnaces. The set point is set on the potentiometer or by means of interface SPI. The parameter and configuration data are stored in the EEPROM.
    • 2 Inputs: Optocoupler (AUTO, ALARM),
    • 2 Outputs: Relay (Star/Delta heater),
    • Analog input :
      • Sensor Tip K = NiCr-Ni (0...1000°C),
      • Sensor Tip J = Fe-CuNi (0...600°C),
      • 0-5V (4-20mA)
    • Control range: 0...1000°C,
    • Resolution: 10 bit (1:1024),
    • Measurement accuracy with linearized transducers: < 0,5%,
    • Indication: 4-digit 7-segment LED display,
    • Option interface: SPI, optically-isolated (RS-485),
    • Supply voltage: 220V ac,
    • Dimensions: 96x96x100mm.
    PI Temperature and Process Controller MCTT-10
    • It is an universal programmable temperature and process controller with 2-states feedback structures for use with industrial furnaces. These furnaces are used for heat treatment of bakelite products. It controls heater, cooler and ventilator. 10 programs can be created. The programs can consist of up to 10 segments. Segments are defined by the segment set point and by the segment time (100 hours max.). The program can be created, edited, deleted and started manually by operating a key. The programs, parameters and configuration data are stored in the EEPROM.
    • 8 Logic Inputs (Active Low) for diagnosing error in power equipment,
    • 8 Logic Outputs (Active Low),
    • Analog input : Sensor Pt-100, (2-wire connection),
    • Control range: 0...250°C,
    • Resolution: 12 bit (1:4096),
    • Measurement accuracy with linearized transducers: < 0,1%,
    • Indication: 2x16 chars LCD matrix display (Backlighting),
    • Interface: RS-485, optically-isolated,
    • Supply voltage: 2x 5V dc,
    • Dimensions: 96x96x150mm.
    Download User Manual:
  • MCTT-10.pdf

    		•
    Buffer Board and Power Supply MCTT-11
    • It is a buffer board and power supply for MCTT-10. The contact between MCTT-10 and MCTT-11 is a 26-pins connector-cable-connector.
    • 8 Inputs:
      • 2 Optocouplers (Opened door, Temperature higher),
      • 1 Sensor (Ventilator no phase),
      • 1 Sensor (Ventilator failure),
      • 3 Sensors (Triac/Heater failure),
    • 8 Outputs:
      • 3 Relays 8A (Contactor ON/OFF, Ventilator left, Ventilator right),
      • Optotriac/Triac 8A (Cooler),
      • Optocoupler/Transistor (Heater),
      • Optocoupler (Alarm),
      • LED (Second indicator),
    • Supply voltage: 2x 12V ac,
    • Dimensions: board 220x145x30 mm.